![]() On the local computer setup, a TFTP/SCP/SFTP or FTP server to download the software package. From the Command Prompt of the computer run ping 192.168.45.45 to confirm connectivity to the FPR 1010 Management interface.Determine the IP address received via DHCP, run the command ipconfig.From the Command Prompt of the computer configure the device has received an IP address from the range 192.168.45.0/24.Connect an ethernet cable from a computer into the Management 1/1 interface of the FPR 1010 device.The software package will be download from a SFTP server installed on a laptop connected to the Management 1/1 interface. The System IP address is the IP address of the Management 1/1 interface of FPR 1000 device. Connect to the console port of the Cisco FPR device and login.Refer to this Cisco Reimaging guide for more information. This post covers the steps to reimage a Cisco FPR1010 device with FTD version 7.1.0, the same procedure will work on other 1000 series models.
0 Comments
Leave a Reply. |